FLOPOWER PRIMER SL 10 KG
FLOPOWER PRIMER SL 1 LT
FLOPOWER PRIMER SL 10 LT is an acrylic copolymer-based transparent primer that acts as a bonding bridge between FLOPOWER and the surface.
Application Areas
FLOPOWER PRIMER SL can be used on surfaces such as walls, putty, plaster, concrete, drywall, and fiberboard.
Thanks to its high penetration properties, it penetrates deep into the surface and enhances the adhesion strength with FLOPOWER flooring.
During application, the surface temperature should be between +5°C and +30°C, and relative humidity should not exceed 80%.
After applying the primer, wait 7-8 hours before using FLOPOWER.
Physical Properties
- Color: Transparent
- Dry content: 35 ± 2%
- Density (g/cm³): 1.04 ± 2
- pH: 6 ± 1
- Glossiness: Semi-gloss
Surface Preparation
Before applying FLOPOWER PRIMER, clean the surface of dust, dirt, and oil residues.
Component Consumption
250 g of FLOPOWER PRIMER can be used to coat 11 m² of surface. This value may vary depending on the absorbency of the surface.
| Color | Transparent |
| Dry content | 35 ± 2% |
| Density (g/cm³) | 1.04 ± 2 |
| pH | 6 ± 1 |
| Glossiness | Semi-gloss |
Other products
see allHave a question?
Click on WhatsApp and we’ll assist you immediately.
flopower-primer-sl-eng.pdf