FLOPOWER SL 213

FLOPOWER SL 213 is a single-component flooring compound, enriched with chemical additives on a cement basis, ensuring seamless surface creation. It self-levels to balance out.
Complies with TSEN 13813 -2004 standards.

Application Areas

• Creating a smooth surface before laying wood, laminate, parquet, carpet, PVC, or ceramic materials;
• Creating a durable and dust-resistant surface in warehouses and similar facilities.

Advantages

• Easy to prepare and use;
• Self-leveling, forming a seamless and smooth surface.

Technical Specifications

• Color: gray
• Application temperature: +50°C - +300°C
• Water/dry mix ratio: 5.0-5.5 liters of water per 25 kg of dry mix
• Application time: 35 minutes
• Application thickness: 3.0 - 10.0 mm
• Curing: initial 15-30 minutes, final 60-90 minutes

Compressive Strength:

• After 7 days: 20 MPa
• After 28 days: 35 MPa

Adhesion Strength:

• 1.3 MPa

Ready for use:
Walkable after 6 hours.
After 24 hours, carpets, parquet, ceramics, etc., can be laid.

FLOPOWER SL 215 SUPER - A single-component flooring compound based on cement, enriched with chemical additives and polymers, providing a seamless surface. It self-levels.
Complies with TSEN 13813 - 2004 standards.

Application Areas

• Creating a smooth surface before laying wood, laminate, parquet, carpet, PVC, or ceramic materials;
• Achieving a durable and dust-resistant surface in warehouses and similar facilities;
• Underfloor heating systems;
• Leveling concrete floors in hospitals and schools.

Advantages

• Easy to prepare and use;
• Self-levels, forming a seamless and smooth surface;
• Highly resistant to cracking.

Technical Specifications

• Color: gray
• Application temperature: +50°C - +300°C
• Water/dry mix ratio: 5.0-5.5 liters of water per 25 kg of dry mix
• Working time: 35 minutes
• Layer thickness: 3.0 - 10.0 mm
• Curing:
  • Initial: 15-30 minutes
  • Final: 60-90 minutes
• Compressive strength:
  • After 7 days: 25 MPa
  • After 28 days: 41 MPa
• Adhesion strength: 2 MPa
• Ready for use: Walkable after 6 hours
• Fully cured: After 24 hours, carpets, parquet, ceramics, etc., can be laid

FLOPOWER PRIMER SL 1 LT
FLOPOWER PRIMER SL 10 LT is an acrylic copolymer-based transparent primer that acts as a bonding bridge between FLOPOWER and the surface.

Application Areas

FLOPOWER PRIMER SL can be used on surfaces such as walls, putty, plaster, concrete, drywall, and fiberboard.
Thanks to its high penetration properties, it penetrates deep into the surface and enhances the adhesion strength with FLOPOWER flooring.
During application, the surface temperature should be between +5°C and +30°C, and relative humidity should not exceed 80%.
After applying the primer, wait 7-8 hours before using FLOPOWER.

Physical Properties

• Color: Transparent
• Dry content: 35 ± 2%
• Density (g/cm³): 1.04 ± 2
• pH: 6 ± 1
• Glossiness: Semi-gloss

Surface Preparation

Before applying FLOPOWER PRIMER, clean the surface of dust, dirt, and oil residues.

Component Consumption

250 g of FLOPOWER PRIMER can be used to coat 11 m² of surface. This value may vary depending on the absorbency of the surface.

SUPER ASTAR
A primer material based on copolymer acrylic dispersion with high absorbency for surfaces.

Application Areas

• Indoor and outdoor spaces, vertical and horizontal surfaces
• Reduces the absorbency of gypsum, drywall, gas concrete, concrete, blocks, bricks, plaster, lime plaster, and wood, improving the adhesion strength of the applied materials
• Used as a primer before applying wallpaper and paint
• Reduces absorbency on surfaces such as drywall, gas concrete, lime plaster, and wood before applying tiles and ceramics.

Advantages

• Reduces water absorbency of the surface
• Provides high adhesion
• Solvent-free, suitable for indoor use
• Prevents cracks caused by sudden water loss on absorbent surfaces during cement and gypsum plaster applications
• Allows water vapor to pass through
• Resistant to freezing and thawing cycles

Technical Specifications

• Material Composition: Modified copolymer acrylic dispersion
• Color: White
• Density: ~ 1.007 kg/l
• Application Temperature: +5°C - +30°C
• Time Before Next Application: Minimum 24 hours